A whole new perspective
Your own display. Set modes, brakes and acceleration your way.





The Challenger 2.0 Belt Drive Street is ONSRA's kicktail shortboard for paved roads and city riding—standard top speed 50 km/h (31 mph) and range up to 43 km (26 miles), with a 2-year warranty on mechanical and electronic components.
Key specs, full specification table and what’s in the box are shown below on this page.
Pairs well with

Challenger 2.0 Belt Drive Street
Key specs


| Range | 100 mm TARMAX: 38 km / 24 mi Up to: 43 km / 26 mi |
|---|---|
| Battery | 12S2P 21700 Samsung 48X — 43.2V — 432 Wh — 10 Ah |
| Top speed | Standard: 50 km/h / 31 mph Up to: 62 km/h / 38 mph (32T pulley, 110 mm wheel) |
| Motors | 2× 1950 W, 2× 2500 W (max), belt drive 5048 160 Kv |
| ESC | ORION ESC: 2× 45 A continuous (per motor) |
| Remote | ONSRA NX |
| Deck | 6-ply maple, 2-ply fiberglass |
| Enclosure | High quality ABS plastic |
| Trucks | TKP trucks (carving and stability) |
| Wheels | 100 mm ONSRA TARMAX |
| Pulleys | 40T Kegel |
| Deck size | 90 cm / 35" × 27 cm / 10.6" |
| Weight | 9.9 kg / 21.8 lbs |
| Wheelbase | 69 cm / 27.1" × 36 cm / 14.1" |
| Max load | 150 kg / 330 lbs |
| Water resistance | IP65 (enclosure sealed with O-ring) |
| Braking | Regenerative |
| Recharge | ~4 h (2.5 A charger) |
| Bushings | 95A |
| Warranty | CNC’d trucks: 4 years Mechanical and electronic components: 2 years Battery: 1 year |
| Included | Fully assembled board, charger (2.5 A), T-tool, 3 mm + 4 mm Allen tool, user manual, remote, USB-C charging cable |



ONSRA NX
Your own display. Set modes, brakes and acceleration your way.
Speed, voltage, temperatures and consumption for every ride, right on the remote.
1.3" color display. CNC aluminium throttle wheel. Ergonomic grip.
Best Electric Skateboard for every Rider
Challenger PRO waterproof
Unboxing
Fabi Challenger PRO Review
it'sMatt first Look
Mr Philips Unboxing
Racing Setup
Challenger VS Evolve Stoke
Damian A First Impression
Challenger VS Evolve Stoke
Challenger AT
Mr Philips review
Belt Drive VS Direct Drive
ONSRA Challenger
Challenger AT
It is ONSRA's kicktail shortboard for paved roads and city riding: 9.9 kg (21.8 lbs), 100 mm ONSRA TARMAX wheels, TKP trucks and a kicktail for curbs and tight turns.
About 38 km (24 mi) on the 100 mm TARMAX wheels and up to 43 km (26 mi), from a 432 Wh battery. Real range depends on rider weight, terrain, temperature and riding mode. Charging takes about 4 hours with the included 2.5 A charger.
50 km/h (31 mph) as standard, and up to 62 km/h (38 mph) with a 32T pulley and 110 mm wheels. Always follow local laws and wear protective gear.
Choose the Street for paved roads: it is slightly lighter and has more range (about 38 km vs about 24 km on AT wheels). Choose the Challenger 2.0 AT for gravel, rough roads and mixed surfaces. For dirt trails, choose the VELAR 2.0 Gear Drive.
The fully assembled board, a 2.5 A charger, T-tool, 3 mm and 4 mm Allen tools, the user manual, the ONSRA NX remote and a USB-C charging cable.
The Challenger Street is rated IP65: the enclosure is sealed with an O-ring against dust and splashing water. It is not made for riding through deep water, and damage from deep water is not covered by the warranty.
Bought directly from ONSRA, this board is covered by the ONSRA GmbH warranty: CNC'd trucks 4 years; motors, deck, enclosure, ESC, remote, charger and other mechanical and electronic components 2 years; battery 1 year. Wear parts such as wheels, bearings, bushings and grip tape are not covered. This voluntary warranty comes in addition to your statutory rights, which remain unaffected. Full terms: warranty page.